Safety of canyoning harnesses

Problem

Some manufacturers, including Rock, Edelweiss, Sins and Beal, appear to have used cheap material that suffers a high loss of strength due to the wet-dry cycle and UV exposure. Material tests are also currently being carried out on (climbing) harnesses from Petzl and Mammut.

An investigation of used canyoning harnesses is currently causing uncertainty and possibly fear regarding the safety and use of canyoning harnesses in practice.

  • The report and its results are already being discussed in various standards bodies (UIAA and CEN) and expert groups and, if the initial findings are confirmed, could lead to a revision of the applicable standard (EN 12277, type C).
  • However, the exact effects cannot yet be estimated, as not all relevant information (for example the materials and material combinations used in the tested harnesses) is available.

The following points are essential for the “safe” use of personal protective equipment:

  • Commercial use of PPE (for example hire) requires regular inspection of the equipment. This must be carried out at least once a year, documented, and performed by a PPE expert or trained person.
  • For an example of inspection and use records, see the Excel file “Einsatzdokumentation Produktüberprüfung” below (in German)
  • The two attached documents (in German) can serve as instructions for the inspection. Further instructions can be found on the manufacturers' websites for the respective products.
  • The most important indication for correctly identifying PPE is the “name of the manufacturer, model type and date of manufacture”. This information is usually on a label sewn into the harness.
  • Together with the maximum service life stated by the manufacturer in the instructions for use (user manuals can be found on all manufacturers' websites), the PPE must then be assessed.
    • If this information cannot be identified, i.e. the PPE cannot be determined exactly, the product must be withdrawn from use
    • If the manufacturer's maximum service life has been exceeded or severe signs of wear are visible, it must be discarded
    • If there is general doubt about the safety of the product, it must be withdrawn from use

 

We are considering organising a collection of discarded canyoning harnesses through the SOA. The harness must be sent in with details of the “name of the manufacturer, model type, date of manufacture and approximate frequency of use”. The harnesses will then be used for further investigation and subjected to destructive testing in the laboratory.

Under the motto “Safety First”:

  • The SOA recommends that all organisations offering canyoning immediately inspect the harnesses and other PPE in use.
  • Critical PPE must be withdrawn from use with immediate effect!

Inspection documents (in German):

The same documents (in German) are also available for download below.